In this Sony Movie Studio Platinum 13 tutorial, I show how to render/export 48fps, 50fps and 60fps video, suitable for upload to YouTube.

YouTube now allows users to upload Higher Frame Rate (HFR) video. The people who are the most excited about this are Gamers, because high frame rate video is far superior for recording fast moving objects. However there is no restriction to anyone recording and uploading high frame rate video. It has a super real quality that makes people look like they could jump straight out of the screen. The future is now here just a few short years after HD video revolutionized YouTube.

Topics covered in this tutorial

Advantages of High Frame Rate Video

Traditional Frame Rates

High Frame Rate Video

How to Record High Frame Rate Video

How to Discover my Source Video's Frame Rate and Media Properties

Starting a New Project - Quick Method

Importing Video into Movie Studio Platinum and Setting Project Properties

Checking your Project Properties and Tweaking a Few Extra Settings

How to Create a Custom Make Movie / Render As Export Template

Creating a Custom Mainconcept AVC/AAC Template

Creating a Custom Sony AVC/MVC Template

Advantages of High Frame Rate Video

High frame rate video is double the frame rate of conventional video, which means the video image will look a lot sharper. If an object is moving fast across across the screen, where it is located in Frame 1 will be very different to where it is located in Frame 2 (on and on it goes). With higher frame rate video, there will now be Frame 1, Frame 2, Frame 3 and Frame 4........ to record the travel of an object. This means the video should appear to have a lot less Motion Blur and hence be sharper and clearer.

Recording at a higher frame rate is also used for creating smooth Slow Motion effects in post production. If you plan to add some slow motion sequences to your projects, you must record at double the normal frame rate or higher. Some cameras like Go Pros can record at 24, 25, 30, 48, 50, 60, 100, 120, 200 and 240 fps. If you were going to deliver a project at 50 fps or 60 fps, you should record your slow motion sequences at 100/200 fps or 120/240fps and then slow the video back down to the Project Settings frame rate. This will give you super smooth and very sharp video.

Traditional Frame Rates

Traditional video up until now is normally recorded at 24 fps, 25 fps or 30 fps.

  • 24 fps (23.976) is used for creating the "film look" and what Hollywood Films have traditionally used.
  • 25 fps is the main frame rate used in countries that support the PAL video system.
  • 30 fps (29.97) is the main frame rate used in countries that support the NTSC video system.

High Frame Rate Video

High Frame Rate video is often referred to as Double PAL 50p or Double NTSC 60p (59.94) video, because that is exactly what it is. There are three double frame rates you can choose from.

  • 48 fps is a new HFR format that Hollywood has been experimenting with. Peter Jackson's The Hobbit was filmed at 48 fps. Using this higher frame caused a polarization of views. Many people didn't like the new look, however others see this as new way forward. There is an interesting article that discusses this here.
  • 50 fps is Double PAL and used in PAL countries.
  • 60 fps (59.94) is Double NTSC and used in NTSC countries.

How to record High Frame Rate (HFR) Video

High Frame Rate video can be recorded in two main ways.

Gamers use screen capture devices or software programs to record exactly what they see on their computer monitor or TV screen. Most Gamers prefer to record at 60 fps, no matter which country/video region they live in, because websites like YouTube can play back 48 fps, 50 fps and 60 fps in all regions and countries.

If you are recording HFR video with a digital camera, you will be limited to the recording options that have been pre-programmed into the camera. If you buy a DSLR or Mirrorless camera in the USA that supports high frame rate video, it will be an NTSC model, which means you will be able to record at 60 fps but not 50 fps.

If you buy your camera in Europe, Asia or Australia, it will probably be a PAL camera and only support up to 50 fps video. However camera technology has been evolving extremely fast during the last 2 years and progressive manufacturers like Sony and Go Pro, often sell International Models which can be set to PAL or NTSC settings, which means you can record at any frame rate you like. Go Pro seems to be the only camera that offers 48 fps unless you are using a professional video camera or an external video recording device.

How to Discover my Source Video's Frame Rate and Media Properties

This is a bit of a side step before we continue and a good tip for becoming more confident in understanding different video formats. If you go to the Project Media tab or Explorer tab and click on top of your video, you will see a read out that describes your Video's Properties and Format.

Here is the example I showed in the video tutorial at top of this article. It tells us that the video is 1920x1080, uses an actual Frame Rate of 59.94 fps, is Progressive style video and uses AVC video format.

I always do this step when I create a new project, so that I am confident my Project Properties are going to be set correctly. If you screw up your Frame Rate settings, it can really turn your whole project into a big ugly mess.

Video Properties

 

Special note for Gamers who Video Screen Capture from their computer monitor - please read the following before you continue !!!

Normal video you see on YouTube and your TV, uses an Aspect Ratio of 16:9. Most computer monitors use an Aspect Ratio of 16:9, however some monitors use an  Aspect Ratio of 16:10.

16:9 monitors use resolutions like 1280x720, 1600x900, 1920x1080, 2560x1440 & 3840x2160
16:10 monitors use resolutions like 1280x800, 1440x900, 1680x1050, 1920x1200 & 2560x1600

If you have captured your game play on a 16:10 screen, you can't use the Match Media settings technique I am about to show below. Instead you will have to set your Project Properties manually to the same as what you see in the screen shots. When you import your 16:10 videos into a 16:9 project, you will end up with small black bars either side of the video.

If the program asks to Match the Media settings - say NO !

To remove the black bars, you can use Event Pan/Crop and set to Preset 16:9 Widescreen.

Starting a New Project - Quick Method

There are many ways to start a new project and if you are a Jedi Master, you probably have worked out your own method by now and don't need to listen to me. If you are a beginner, I like to keep things as simple as possible and use some cool shortcuts. My first shortcut involves completely ignoring the top section of the New Project window. We are going to use an easier method for setting the Project Properties and make sure they match your source videos.

1. Go to Project / New to start New Project wizard.

2. Enter a Name for you high frame rate project.

3. Check that the Folder location is set to where you want your project saved to. Click Browse if it needs changing.

4. Select Manage project files and this will auto-magically create a folder structure for your project files to live in.

New Project wizard

Importing Video into Movie Studio Platinum and Setting your Project Properties

There is a simply way to start all your Movie Studio projects, which should gaurantee that your Project Properties are set accurately every time.

Import your first video directly onto the Timeline. As soon as you release your mouse button, the following window should pop up. If this window does not appear, it normally means your Project Properties already match your Source Video's Properties. Say YES to this question and/or select Always base project video settings on first-added video and then say yes.

Match Media settings

Checking Your Project Properties and tweaking a few extra Settings

Step 1 - Press the Project Properties button above the Preview Window.

Project Properties button

 

Step 2 - In the window below we can see that Movie Studio has set the Video Project Properties to Match the Properties of the video I imported into the project - the same video I showed the read out for in Project Media tab.

One setting that you will have to set manually is Full Resolution Rendering Quality, which should always be set to Best. By default the De-Interlace method is normally set to Blend Fields. This setting only has an effect on Interlaced Video if it is added to the project. If you know that all your videos are definitely Progressive style video, it is safe to set this to None. Most modern video is now Progressive, with Interlaced being an older format that is being used less and less.

Project Properties - Video

 

Step 3 - Select the Audio tab and make sure Resample and stretch quality is set to Best. Then click Apply & OK.

Project Properties - Audio

How to Create a Custom Make Movie / Render As Export Template

Press Make Movie at top of desktop, then select Save it to my Hard Drive, then select Advanced Options.

Make Movie

Save to Hard Drive

Advanced Options

Now you are in the Render As window and can select a Format to render/export to. The two best Formats for upload to YouTube are Mainconcept AVC/AAC or Sony AVC/MVC.

CREATING A CUSTOM MAINCONCEPT AVC/AAC TEMPLATE

Select Mainconcept AVC/AAC from the Formats list and then select Internet HD 1080p from the Templates list, then press Customize Template.

Render As

 

Double NTSC 60 fps (59.94) Custom Settings

If you are creating a 60 fps project, use the settings shown in screen shot below.
The most important thing to change is the Frame Rate to 59.94 fps
You can manually type this Frame Rate into the field.

The Encode Mode will vary depending on the capabilities of your computer. CPU only is the safest option if you are unsure. If you have a compatible Nvidia Graphics Card, use CUDA. If you have a compatible AMD Radeon Graphics Card, use OpenCL.

Once all your settings look good, you can save your custom Template for next time and then press Render to begin your export. What you name your custom template is up to you - whatever makes the most sense to you is correct!

60 fps Double NTSC Settings

 

Double PAL 50 fps Custom Settings

If you are creating a 50 fps project, use the settings shown in screen shot below.
The most important thing to change is the Frame Rate to 50.00 fps
You can manually type this Frame Rate into the field.

The Encode Mode will vary depending on the capabilities of your computer. CPU only is the safest option if you are unsure. If you have a compatible Nvidia Graphics Card, use CUDA. If you have a compatible AMD Radeon Graphics Card, use OpenCL.

Once all your settings look good, you can save your custom Template for next time and then press Render to begin your export. What you name your custom template is up to you - whatever makes the most sense to you is correct!

50 fps Double PAL Settings

Creating a Custom Sony AVC/MVC Template

Select Sony AVC/MVC from the Formats list and then select Internet 1920x1080-30p from the Templates list, then press Customize Template.

Render As

 

Double NTSC 60 fps (59.94) Custom Settings

If you are creating a 60 fps project, use the settings shown in screen shot below.
The most important thing to change is the Frame Rate to 59.94 fps

The Encode Mode will vary depending on the capabilities of your computer. CPU only is the safest option if you are unsure. If you have a compatible Nvidia Graphics Card, use CUDA. If you have a compatible AMD Radeon Graphics Card, use OpenCL.

Once all your settings look good, you can save your custom Template for next time and then press Render to begin your export. What you name your custom template is up to you - whatever makes the most sense to you is correct!

60 fps Double NTSC

 

Double PAL 50 fps Custom Settings

If you are creating a 50 fps project, use the settings shown in screen shot below.
The most important thing to change is the Frame Rate to 50.00 fps

The Encode Mode will vary depending on the capabilities of your computer. CPU only is the safest option if you are unsure. If you have a compatible Nvidia Graphics Card, use CUDA. If you have a compatible AMD Radeon Graphics Card, use OpenCL.

Once all your settings look good, you can save your custom Template for next time and then press Render to begin your export. What you name your custom template is up to you - whatever makes the most sense to you is correct!

50 fps Double NTSC

Time for a cup of tea or crack open a beer ☺

 

$20 Off on Vegas Movie Studio Platinum

VEGAS Movie Studio

If you already own an older version of Vegas Movie Studio, you can purchase a discounted upgrade via this link.

 

Derek-Moran-60x60

About Derek Moran
Derek Moran is the author of all articles on Movie Studio Zen.
You can find me on YouTube, , FacebookTwitterRead more about Derek...

 

Say something here...
symbols left.
You are a guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • Your comment will be reviewed by a moderator before it is published on the site.
    9190
    • Member
    · 10:41 12/02/2018
    Thank you for the article and video Derek.
    I think there is some extremely important moment (maybe the most important for this article) that was missed in the article when you choose frame rate for Custom Settings - MainConcept AVC/AAC window. You even didn't mention, that you have to put frame rate value (59.94) MANUALLY in the Frame rate field. This is the key moment of the whole article, and it was missed. Thanks God, it was shown in your video, otherwise reading only this article alone I would never get, why I don't have that 59.94 value in the Frame rate drop-down list, and you have it on your screenshot. That's why many people think, that it's impossible to render video at 60 fps. By the way it's strange, that you write sometimes 60p instead of 60fps (for example: "I show how to render/export 48p, 50p and 60p video, suitable for upload to YouTube"). You even gave the name to your custom template as "Internet HD 1080-60p". I think it should be something like "Internet HD 1080p60" or "Internet HD 1080p 60fps".
    • Your comment will be reviewed by a moderator before it is published on the site.
      Derek
      • Moderator
      · 11:40 12/02/2018
      Thanks for your feedback.
      In the article I did show exactly which settings to use in all of the SCREEN SHOTS.
      The screen shots clearly show which frame rate to enter.
      I also used the words "If you are creating a 60 fps project, use the following settings."
      "I show how to render/export 48p, 50p and 60p video, suitable for upload to YouTube"
      This is incorrect and I have edited this to say fps instead.
      60p and 60fps have become interchangeable terms on the Internet, but I agree they can cause some confusion I do understand the confusion in typing p instead of fps.

      I have edited the article to make everything crystal clear now.
      Cheers
      • Your comment will be reviewed by a moderator before it is published on the site.
        9190
        • Member
        · 21:55 12/02/2018
        "In the article I did show exactly which settings to use in all of the SCREEN SHOTS.
        The screen shots clearly show which frame rate to enter.
        I also used the words "If you are creating a 60 fps project, use the following settings".

        Yes, screenshots are very good and informative. But the problem was that I didn't know that it's necessary to enter that 59.94 value manually from the keyboard, and not choosing from the drop-down list of that field. There is only one word "enter" in your article: "Enter a Name for you high frame rate project". Buy the way, should be "your", not "you" "Use the following settings" doesn't say (at least for me) that value should be entered in the field manualy from the keyboard, and not chosen from the drop-down list. That's why I always prefer video reviews to articles. On videos things always much clearer.

        Upd: Oh, you not only corrected p to fps, but also added that moment with manual entering of the value. Thank you.
  • Your comment will be reviewed by a moderator before it is published on the site.
    Myan · 19:31 03/11/2016
    Aloha Derek,
    I have a i7-6700K processor and a GeForce GTX 1060 3gb, when i go to render on your recommended settings it takes HELLA long to render! Is there any way I can speed up the process? it only took 13min to render a 9min video @ 108030fps and it takes 45min-60min to render a 108060fps video. Any suggestions?
  • Your comment will be reviewed by a moderator before it is published on the site.
    delquad4x
    • Member
    · 01:27 30/08/2016
    Hey Derek,
    I'm having an issue where whenever I import a 60fps movie onto the timeline, SMS13 crashes.
    The preview works fine. But as soon as I drop it on the timeline --- BOOM! It crashes.

    I've gone through and set the project up as you show here and it does the same thing.
    First time I noticed it was importing from a Samsung Galaxy S7 FHD movie shot at 60fps. No biggie. Converted on the phone and imported as 30fps. Worked fine.
    Now I'm trying to import a 60fps movie shot on a RunCamHD action cam and that's where the crashing occurs.
    The footage is kind of important and I would rather not have to down-convert it to 30fps.
    Any suggestions?

    (This happens on 2 different machines by the way. One is my Dell Latitude laptop and the other is my Optiplex 760 geared up for video processing.)

    Thanks for any info.
    -- Mike
    • Your comment will be reviewed by a moderator before it is published on the site.
      Derek
      • Moderator
      · 14:14 30/08/2016
      The crashing would indicate the RunCamHD is using a non-standard video codec version that Movie Studio cannot decode properly. I recommend you use Handbrake to convert video into H.264 .mp4 file and then import into Movie Studio. Handbrake is a free open source program and converted to highest possible settings. I will be making a new tutorial about this soon.
      https://handbrake.fr/
      [i]Like all free software, it sometimes may ask if you want extra free programs when you install. Go slowly when you install and if option comes up to get extra program, just deselect and continue install of Handbrake only.[/i]
      • Your comment will be reviewed by a moderator before it is published on the site.
        delquad4x
        • Member
        · 00:35 31/08/2016
        Thanks Derek. I have downloaded Handbrake and ran a quick test after converting to H.264 codec.
        I'm not sure if I set up everything right in Handbrake, but it did work.
        No issues after the conversion. :cheer:
        I look forward to your tutorial on how to best use Handbrake effectively.

        - Mike

Zen Social Media

MOVIESTUDIOZEN.COM

© Copyright 2018. Movie Studio Zen. All Rights Reserved.

Support Movie Studio Zen

patreon 200

Movie Studio Zen is a fully independent site and all our content is free. You can help support the site by visiting the MSZ Patreon page or by making a PayPal donation.

Translate Language

 

MSZ Security

Positive SSL

Back to top

We use cookies to ensure that we give users the best experience on Movie Studio Zen. By continuing to use this website, you are giving consent to cookies being used.